Camera
I have black spots visible on my picture, whenever I take picture above F8. What to do?
These are dust particles on camera Image Sensor (CCD or CMOS) which comes visible when you take pictures above F8. You can try to blow them by using hand blower but we strictly advise that consult a professional.
I am seeing dust particles in my viewfinder and they are also visible on results.
The dust particle in viewfinder doesn’t come on result (except some particular model). The spots you are seeing on result are dust particles on sensor. However both can be cleaned but we advised to visit a professional.
Whenever I attach my any lens on my Canon camera body its showing Err-01. What to do?
Please try cleaning the contacts in camera first with any clean cloth if it still shows the err then it means, one of the motherboards is faulty and you need to consult a professional to have look into it.
My Sony Dslr Lens is not focussing. It has been showing F00 also.
There are many reasons behind this but one which is very often is the aperture unit has stopped working so the AUTOFOCUS doesn’t work.
Whenever I put my memory card in my camera it shows “card is locked, unlock the card” but card is unlocked already.
Actually there is a switch inside the camera card slot which functions when you insert the card. It often gets broken so visit professional to get it fixed.
My NikonD90 (D7000, D7100, D750, D610, D800, D80, D40, D3100, D3000, D5100) Shows ERR on above screen (or on back LCD) whenever I click. Anyhow camera does click one shot but after that it shows ERR.
The shutter unit has stopped working properly (a shutter unit has many parts and one of the parts get faulty) so the camera half clicks (mirror or curtain works but they are not working simultaneously) hence showing the ERR.
I am getting Black horizontal line in my picture frame, if I shoot with external flash.
It can be because of externalflash is not syncing with camera shutter.
I am getting a wide black line in my picture frames on different-different angles.
It could be because of broken curtain in camera.
There are some tiny colored spots visible in the result of camera(picture and video both) when I enlarge the picture. what are they ?
These are due to burned image Sensor. Some of pixels in sensor got defected so they are particular in RGB colour visible in result.
I always face shutter issue while I was shooting dance on weddings. My camera doesnt click sometimes. It doesnt focus sometimes.
Please try using Tracking focus option in camera. If that doesnt help then try cleaning the rear element of the lens.
I am facing the issue of high temprature warning on my point and shoot camera while I was recording video on 4K.
It's because on 4K video recording mode, camera does transfer data signals on very high rate which cause camera circuit to heat up.
Canon Mark with 24-70mm IS lens stops recording after 20sec. Tried lot of things but could not resolve it.
Please try updating the firmware of the camera if that does not help then it could be a problem of faulty motherboard.
My Nikon D750 was not clicking immediately. it was clicking as soon as I lift my finger.
It could be because of carbon in clicking button or malfunctioned shutter unit.
